Custom HVAC engineering for California homes, designed from your plans.

Room-by-room loads, equipment selected to them, the airflow and register size for every room, ventilation and exhaust, and space and clearances, all worked out from your plans. Title 24 too, when you need it.

For builders

HVAC designed to the standard you build to.

Room-by-room loads, equipment selected to them, and clearances settled on paper, with an engineer who answers.

How it works for builders

For architects

Draw the equipment closet once.

Equipment that fits the design, with space and clearances settled early.

How it works for architects

For HVAC contractors

An engineer behind your install.

An engineer responsible for the design, with the numbers the inspector sees.

How it works for contractors

For homeowners

Ask your builder who's sizing the HVAC.

Designed for quiet, even comfort: a system sized to your house, not a rule of thumb.

How to work with us

Fixed fee, quoted from your plans. With any HVAC design, the design package is delivered within 5 business days from your start date and complete plans (10 for a bigger home, an extra system, or a second dwelling; three or more homes, in your proposal). Southern California office, projects statewide.

Ways to work with us.

Each is a fixed fee, quoted from your plans.

Strome Signature+

Strome Signature, with desk support through construction.

Everything in Strome Signature, plus:

Your contractor's submittals and questions come back to the engineer who designed the system.

What's included

Equipment and ERV submittal reviews, each with a recheck; a second duct-layout review if the contractor's layout changes; up to 8 written answers to your contractor's questions about our documents; and a second review of the installer's readings after corrections. Each comes back within 2 business days of a complete set. These are desk reviews of what your contractor sends us. Exact scope is in your proposal.

Strome Signature Recommended

Indoor air quality, designed in.

Drawn sheets, signed and stamped by our founding engineer

Everything in HVAC design + Title 24, plus:

Balanced fresh air with an ERV, MERV 13 to 16 filtration, and air sensing with a one-touch smoke mode.

What's included

Your HVAC design drawn as mechanical sheets on your architect's floor plans, signed and stamped, in place of redlines. The fresh air, filtration and smoke mode are designed with the HVAC and modeled in the same Title 24 run, and we review the readings your installer sends back, with a short letter. For new homes and additions. Exact scope is in your proposal.

HVAC design + Title 24

Manual J, S, and D, with Title 24

Where every package starts.

One licensed engineer owns your project, from the first load to the stamp.

What's included

Manual J load calc, Manual S equipment selection, Manual D duct design or room airflows for your contractor's layout, ventilation and exhaust, and equipment schedules, with Title 24 run from the same loads and equipment. For new homes and additions. We review your contractor's duct layout once, with a recheck. Exact scope is in your proposal.

Need it sooner? Expedite works on any package: the design package within 3 business days for one home with one system up to 3,000 sq ft, or 5 for a bigger home, an extra system, or a second home or accessory unit, from your start date and complete plans. Offered when our calendar has room, and your proposal confirms the days.

Remodel, or just one piece? HVAC design only, Title 24 only, and load calc only are packages too.

Three steps, little effort from you.

  1. Ask for a quote

    Send the plans if you have them, or the square footage and what you need if you don't. We come back with questions only when we need them.

  2. We calculate and design

    We run the load calc, pick equipment to match, and work out the duct routes, room airflows, and ventilation, plus the Title 24 model when it's in scope. You get one page of inputs to confirm.

  3. An engineer responsible for the design

    You get the design package for plan check, with stamped Manual J and S calculations, plus a signed Title 24 report when it's in scope. Questions on it go to the engineer who did the work.

Why Strome

Engineering for the people who live there.

Strome's founding engineer spent years engineering major commercial construction, where the mechanical system is calculated, drawn, and coordinated before it's built. On homes, the HVAC is often a rule of thumb, and the family lives with the guess.

Read the story

From a recent job

Before the load calc was finished on a recent two-building project, the architect had a space and clearance reservation for every outdoor unit, fan coil, and equipment closet.

Get a quote.

Send the plans if you have them; a PDF of the architectural set is enough. No plans yet? The square footage and what you need are enough for a quote. We reply by email with questions, if any, and a quote. The engineer who runs the load calc and picks the equipment is the one who answers your email.

Get a quote